ZDSChem Repair Coatings · IoT Sensors · NDT Equipment · Process Instruments · Safety · Welding · Automation · SCADA
طلاءات ZDSChem · مستشعرات IoT · معدات NDT · أجهزة قياس العمليات · السلامة · اللحام · الأتمتة · SCADA
Cold-weld epoxy repair · Ceramic wear coatings · Tank linings · Underwater repair · Pipe wrap · Belt repair · Floor coatings
Supplied to GCC, Egypt, Nigeria, Kenya, Ghana, South Africa and Africa — competitive pricing vs Belzona, Devcon, Chesterton
إيبوكسي إصلاح المعادن بالربط البارد · طلاءات سيراميك مقاومة للتآكل · بطانات خزانات · إصلاح تحت الماء · تغليف أنابيب · إصلاح أحزمة · طلاءات أرضيات
مورَّدة للخليج ومصر ونيجيريا وكينيا وغانا وجنوب أفريقيا وأفريقيا — أسعار تنافسية مقارنة بـ Belzona وDevcon وChesterton
Two-component epoxy metal repair compound for rebuilding and filling worn, eroded, or corroded metal surfaces without welding or machining. Excellent adhesion to steel, cast iron, aluminium and bronze. Cures at room temperature. Resistant to chemicals, oils and fuels. Comparable to Belzona 1111 and Devcon Titanium — significantly lower cost. Applications: pump casings, valve bodies, pipe walls, gearboxes, flanges.
Brushable two-component epoxy for metal repair and rebuilding at elevated temperatures (up to 175°C continuous service). Provides a smooth, machinable surface after cure. Ideal for heat exchanger shells, boiler components, steam system components, and pipe elbows. Superior chemical and thermal resistance. Alternative to Belzona 1321 and Devcon Titanium Hi-Temp.
Specially formulated two-component epoxy that cures underwater and in wet environments. Displaces water on contact with the substrate, ensuring excellent adhesion to submerged or wet steel and concrete structures. Used for emergency repairs on ship hulls, submerged pipe structures, offshore platforms, water intake structures and sewage infrastructure.
Heavy-duty ceramic-filled epoxy coating for protection against severe abrasion, erosion and corrosion. Contains silicon carbide (SiC) and alumina particles for exceptional hardness (Shore D 85+). Ideal for slurry pump internals, cyclone liners, pipe bends and chutes in mining, cement, and petrochemical applications. Outperforms Belzona 1812, Chesterton ARC compounds.
Fine ceramic particle-filled epoxy providing a smooth, hard lining for pipe internals, tank linings and equipment subject to mild-to-moderate erosion and corrosion. Excellent chemical resistance to acids, alkalis, and solvents. Pourable/trowelable consistency for tank and vessel lining applications. Alternative to Belzona 4111 and Chesterton 2211.
Solvent-free epoxy coating specifically formulated for immersion service in petroleum products, crude oil, potable water and chemical tanks. Passes WRAS (Water Regulation Advisory Scheme) requirements. Excellent resistance to hydrocarbons, H2S, CO2 and biogenic sulfide attack. Two-coat system for new construction and rehabilitation of storage tanks. Comparable to Belzona 1511 and 5811.
High-performance novolac epoxy lining with exceptional resistance to aggressive chemicals including concentrated acids, solvents, and oxidising agents at elevated temperatures (up to 150°C). Ideal for chemical plant reactors, scrubbers, pickling tanks, and acid storage vessels. Higher crosslink density than standard epoxy. Alternative to Belzona 5831 and Derakane vinyl ester systems.
Fast-setting, solvent-free epoxy system that cures in wet and underwater conditions (fresh water and sea water). Achieves 80% of its full cure strength within 4 hours at 20°C. Excellent for emergency structural repairs and corrosion protection where dewatering is not possible. Large cost advantage vs Devcon Underwater Putty and Belzona 4154.
Solvent-free epoxy coating for long-term corrosion protection of steel in immersed, splash zone and tidal conditions. Excellent adhesion to blasted or mechanically prepared steel surfaces. High build (500 µm per coat). Resistant to cathodic disbondment, making it compatible with impressed current cathodic protection systems. Ideal for offshore structures, jetties, piles and subsea pipework.
Two-part epoxy resin system with glass fibre reinforcement for structural and corrosion repair of pressurised pipes without shutdown or hot work. Suitable for carbon steel, stainless steel, GRP and concrete pipes. Applied as wet lay-up wrap. Compliant with ISO 24817 and ASME PCC-2 requirements when applied by qualified personnel. Alternatives to Clock Spring, Syntho-Glass and Furmanite wrap systems.
Two-component polyurethane system for repair and bonding of rubber conveyor belts, rubber linings, elastomeric components and rubber-to-metal assemblies. Flexible after cure (Shore A 60-70). Excellent abrasion resistance. Used in mining, quarrying, cement, port and bulk materials handling operations across GCC and Africa.
One-component neoprene contact adhesive for field repair of rubber linings, gaskets, seals and conveyor belting. Solvent-borne formula providing fast tack and strong bond to rubber, fabric, steel and concrete substrates. Temperature resistance to 90°C continuous. Equivalent to Henkel Bostik neoprene systems at significantly lower cost.
Two-component aliphatic polyaspartic polyurea topcoat for industrial floors, external equipment, structures and concrete surfaces. Fast cure (tack-free in 30 min, walk-on in 4 hours). Outstanding UV stability — no yellowing. Excellent abrasion and chemical resistance. Gloss or satin finish available. Widely used as a topcoat over epoxy primers in oil & gas, petrochemical and infrastructure projects across GCC.
Anti-slip polyaspartic floor coating system incorporating fine aggregate for pedestrian and vehicle traffic areas in industrial facilities. Suitable for ramps, loading docks, walkways and factory floors in GCC petrochemical, food & beverage and logistics facilities. Meets OSHA and GCC safety flooring requirements. Includes primer, body coat and aggregate broadcast.
Industrial-grade IoT sensor for real-time temperature and humidity monitoring. MQTT/Modbus, LoRaWAN/WiFi/4G, IP67. GCC and Africa industrial use.
Industrial IoT edge gateway supporting Modbus, OPC-UA, MQTT. 4G/LTE + WiFi + Ethernet. DIN-rail mount.
Smart DP transmitter with IoT connectivity. ±0.04% accuracy, SIL2, Ex-d housing for petrochemical plants.
Non-intrusive clamp-on flow meter with IoT dashboard. DN15–DN6000, ±1% accuracy, RS485 Modbus.
Tri-axial wireless vibration sensor for rotating machinery. BLE 5.0 + LoRa, 3+ year battery.
Portable UT flaw detector with A-scan, B-scan, thickness measurement. ASME/AWS compliant, IP65.
Advanced PAUT system: S-scan, TOFD, linear scan, DICONDE export, ASME/AWS code compliance.
Complete MPI set: UV/white light yoke, AC/DC electromagnetic yoke, UV LED lamp, gauss meter.
Portable 160-200kV X-ray for field weld radiography, ASME Section V compliant.
Dual-mode gauge: metal thickness + through-coating measurement. A-scan display, 10,000-point datalogger.
±0.04% accuracy DP transmitter, HART 7, FOUNDATION Fieldbus option, SIL2, Ex ia/d.
DN15–DN2000, ±0.2% accuracy, SS316 electrodes, IP68, bi-directional measurement.
±0.1% mass flow accuracy, density measurement, HART + Profibus, SIL2, ATEX/IECEx certified.
H2S, CO, LEL, O2 detection. ATEX/IECEx Zone 1, IP66, 4-20mA + relay outputs.
O2/LEL/H2S/CO detection, man-down alert, 18-hour battery, IP67, ATEX certified.
400A MIG/MAG power source, synergic control, double pulse, suitable for GCC fabrication shops.
AC/DC TIG inverter 315A, high-frequency arc start, pulse TIG, ASME IX compliant.
Multi-function CP survey instrument: CIPS, DCVG and Pearson. GPS logging, 100,000-point memory.
IEC 61000-4-30 Class A analyser: harmonics to 50th, transients, sag/swell. IEEE 519-2022 compliant.
640×480 IR camera, -20°C to 1500°C, ±2°C accuracy, MSX image enhancement, Wi-Fi streaming.
IEC 61131-3 PLC, EtherNet/IP + Profibus + Modbus, redundant CPU option, SIL2 capable.
Industrial VFD 0.4-800kW: V/F + sensorless vector, built-in EMC, STO SIL2, Modbus/Profibus.
Unlimited-tag SCADA, HTML5 web client, OPC-UA server, IEC 62443 cybersecurity, mobile access.
Complete arc flash PPE kit Level 4: suit, hood, class 4 gloves, boots. NFPA 70E, IEC 61482 compliant.
0.025% FS accuracy portable calibrator, 300 bar, mA source/measure HART communicator, ISO/IEC 17025.
All-in-one process calibrator: 4-20mA, HART 5/6/7, thermocouple/RTD simulation, frequency/pulse.
Full range ASME Class 150-2500 valves: gate, globe, ball, butterfly, check, control. API 600/608/609, NACE MR0175.
API 610 centrifugal, API 674 reciprocating, submersible and metering pumps. SS316, Duplex, Hastelloy.
ZDSChem chemical systems and industrial technology products — supplied to Saudi Arabia, UAE, Qatar, Kuwait, Oman, Bahrain, Jordan, Egypt, Nigeria, Kenya, Ghana, South Africa and worldwide
أنظمة كيماويات ZDSChem ومنتجات التكنولوجيا الصناعية — مورَّدة للسعودية والإمارات وقطر والكويت وعُمان والبحرين والأردن ومصر ونيجيريا وكينيا وغانا وجنوب أفريقيا وعالمياً